Wet Look Sealer – High Gloss Colour Enhancing Sealer for Natural Stone
Pricing: £53.00-£215.00
Free UK delivery on orders over £75.
Bundle deals available, up to 30% off selected cleaners and sealers.
High-performance wet look sealer designed to enhance natural stone colour while delivering a durable high gloss finish.
Professional 2-in-1 colour intensifying and protective formula suitable for internal and external porous surfaces.
Description
High Gloss Wet Look Sealer for Natural Stone
Wet Look Sealer is a professional-grade, solvent-based impregnating sealer formulated to dramatically enhance natural stone colour while delivering a strong high gloss “wet look” finish.
Designed as a 2-in-1 solution, it both intensifies colour and provides long-lasting stain protection in one application system.
Ideal For
Sandstone
Limestone
Slate
Black limestone
Terracotta
Quarry tiles
Brick
Concrete
Polished concrete
Terrazzo
Grouting and pointing
Suitable for indoor and outdoor use including patios, driveways, paths, cladding, façades, floors and worktops.
Not suitable for non-porous or glazed surfaces such as ceramic or porcelain tiles.
Why Choose This Sealer
This advanced 100% active, low-odour solvent formula:
Deepens and enriches natural stone tones
Creates a strong gloss “wet look” finish
Provides excellent water and stain repellency
Remains breathable to allow vapour transmission
Restores faded paving and stone surfaces
The first coat delivers strong colour enhancement, while the second coat produces the full gloss wet look effect.
Application Guidelines
Dilution: Ready to use (do not dilute)
Application Method: Sponge, sprayer or brush (roller not recommended)
Coats Required: 2 coats
Coverage: Up to 25m² per litre per coat
Drying Time: 45–60 minutes between coats
Full Cure: Minimum 48 hours (keep surface dry)
Application Notes
Surface must be clean and completely dry before sealing.
Apply thin, even coats.
Remove excess product within 15–30 minutes when applying the first coat if a lower sheen finish is desired.
Apply a second thin coat after 60 minutes for a full high gloss finish.
Avoid foot traffic until fully tack-free and cured.
Application temperature range: 5°C – 20°C.
Expected Performance
When applied correctly (2 coats), colour enhancement can last 5+ years under normal conditions. Gloss levels may require maintenance top-ups depending on traffic and wear.
Longevity depends on correct preparation, application and maintenance.
Important Information
Do not overapply. Excess product can cause:
White moisture clouding
Sticky surfaces
Uneven gloss
Keep treated areas completely dry during the curing period.
Sealing improves stain resistance but does not make surfaces fully stain-proof.
Safety Information
Flammable liquid and vapour.
Wear protective gloves and eye protection.
Avoid inhaling vapours.
Keep out of reach of children and pets.
Full Safety Data Sheet available upon request.
Storage
Store in original container, sealed and away from heat or direct sunlight.
Additional information
Weight: 1 kg
Dimensions: 14 × 6 × 22 cm
Size: 1 Litre, 5 Litre