Universeal Stone Foam (442ml) aerosol – Water-Based Colour Enhancer – low-VOC sp

Free UK delivery on orders over £75.

Bundle deals available, up to 30% off selected cleaners and sealers.

Water-Based Colour Enhancer

A low-VOC spray foam colour-enhancing stone sealer that penetrates grout, stone and masonry to enhance natural colour while protecting against oil and water-based stains. No-mess foam application. Suitable for internal and external use.

Description

Universeal Stone Foam (442ml Aerosol) is a low-VOC, water-based colour-enhancing stone sealer designed to protect and enhance natural stone, grout and masonry surfaces.

This advanced spray-foam formula penetrates deep into the surface to protect against oil and water-based stains while enriching natural colour and texture. The unique no-mess foam clings to vertical surfaces, providing accurate, non-streak coverage and easy application.

Suitable for both internal and external use on a wide range of natural stone and masonry materials.

Suitable for:

• Natural stone

• Grout

• Masonry

• Brick

• Quarry tiles

• Victorian tiles

• Saltillo tiles

• Slate

• Terracotta

• Sandstone

• Stone mosaic

• Indoor and outdoor surfaces

Special Features

• Easy spray-on foam application

• Dual action colour enhancer and sealer

• No-mess, non-streak foam formula

• Enhances natural stone colour and appearance

• Stain and scuff resistant protection

• Suitable for internal and external use

• Up to 15 years protection (depending on conditions)

Directions for Use

Important: Once cured, this product is very difficult to remove. Read instructions fully before use.

1. Ensure the surface is completely clean, dry and free from wax, sealers or coatings.

2. Shake can thoroughly before use.

3. Hold approximately 25–30cm (10–12 inches) from the surface and spray a fine mist.

4. Allow to stand for a few minutes.

5. Work the foam into the surface using a clean dry cloth or sponge.

6. Repeat if required to achieve the desired enhancement.

7. Allow to cure for 24 hours.

8. Test using water droplets — if absorbed, apply additional coats if required.

Please Note

• Protect surrounding areas with masking materials.

• Always test in an inconspicuous area before full application.

• Suitability for use is the responsibility of the user.

Expected Wear

Protection can last up to 15 years depending on surface type, wear and maintenance.

This is not a product warranty.

Maintenance

Clean treated surfaces using a pH-neutral cleaner such as Universeal Easy Clean.

Avoid harsh or abrasive cleaning products.

Coverage

Per 442ml can: approximately 5–14m²

Coverage varies depending on surface porosity and application method.

Usage Guidelines

Drying Time: 20–30 minutes

Applications: 1–3 coats

Application Method: Aerosol spray & cloth

Dilution: Undiluted

Stain Protection

Sealing improves stain resistance and durability but does not guarantee complete stain prevention.

For technical support contact 01300 345898.

KEEP OUT OF THE REACH OF CHILDREN AND PETS

Hazards:

Pressurised container: may burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.

Precautions:

Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing vapour/spray. Use only outdoors or in a well-ventilated area.

Use personal protective equipment as required. Get medical advice/attention if you feel unwell. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Dispose of contents/container in accordance with national regulations.

Product SDS sheet available upon request.

Additional information

Weight: 0.6 kg

Dimensions: 6 × 6 × 27 cm

Size: 442ml