Professional Wet Look Sealer for Natural Stone Patios & Paving
Pricing: £55.00-£195.00
Free UK delivery on orders over £75.
Bundle deals available, up to 30% off selected cleaners and sealers.
bundle deals available - up to 30% off selected cleaners and sealers
Professional Wet Look Sealer for Natural Stone
Quick-drying outdoor sealer that enhances colour and adds a durable wet look finish to porous natural stone patios and paving.
Customer Tip: choose the right wet look finish sealer
Tester Available: please note sample bottles (25ml/150ml) are tester/demonstration products – they are deemed non-returnable.
Description
Professional Wet Look Sealer for Natural Stone Patios & Paving
Patio Stone Sealer Wet Look Finish is an advanced water-based sealer designed to enhance colour and create a rich wet look finish on natural stone patios, paving and pathways.
This high-performance formula penetrates porous stone to provide durable stain protection while delivering a darkened, slightly wet appearance.
Ideal for:
Sandstone & Indian Sandstone
Limestone
Slate
Quarry tile
Travertine
Granite
Concrete & pre-cast paving
Key Benefits
Enhances natural stone colour with a wet look effect
Water-based, low odour formula
Quick drying (60–90 minutes)
Self-levelling and easy to apply
Durable protection against oil and water-based stains
Suitable for most porous natural stone surfaces
Important Suitability Notes
Not suitable for chemically damaged stone.
Does not significantly enhance very light stones such as Kandla Grey sandstone.
For a higher gloss “rained upon” finish, consider ULTRA Wet Look Sealer.
Always test first to confirm the final appearance on your stone.
Results vary depending on the colour, texture and porosity of the stone. Darker stones will show a stronger wet look effect.
Usage Guidelines
Coverage: Up to 20m² per litre per coat
Drying Time: 60–90 minutes between coats
Applications: 1–2 thin coats
Application Method: Sponge, sprayer or brush (do not use roller)
Dilution: Apply undiluted
Directions for Use
Always carry out a small test patch before full application.
Ensure the surface is completely clean and dry.
Apply thinly and evenly using a sponge, paint pad, brush or sprayer.
Spread out any puddles or pooling immediately.
Allow 60–90 minutes drying before applying a second thin coat if required.
Keep the surface completely dry for up to 72 hours during curing.
Do not overapply. Excess product can cause stickiness, white patches or blistering.
Application Conditions
Apply between 5°C – 20°C.
In colder conditions, drying times may increase.
Do not walk on the surface until fully dry.
Coverage
Up to 20m² per litre per coat.
Coverage will vary depending on surface porosity and texture.
Stain Protection
Sealing does not guarantee complete stain prevention. However, when applied correctly, it significantly improves stain resistance and simplifies ongoing maintenance.
For technical advice, contact 01300 345898.
Safety Information
KEEP OUT OF THE REACH OF CHILDREN AND PETS
H302: Harmful if swallowed.
H319: Causes serious eye irritation.
P102: Keep out of reach of children.
P233: Keep container tightly closed.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302+P350: IF ON SKIN: Gently wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P333+P313: If skin irritation or rash occurs: Get medical advice.
Product SDS sheet available upon request.
Additional information
Weight: 6 kg
Dimensions: 20 × 18 × 30 cm
Size: 5 Litre, 25 Litre, 3 for 2 offer (3x 5L Bottles)