Anti-Slip Treatment Neutraliser – pH Balancing Formula
Pricing: £14.50-£42.00
Free UK delivery on orders over £75.
Bundle deals available, up to 30% off selected cleaners and sealers.
Professional pH neutralising solution designed to deactivate and balance Feel-Safe Anti-Slip treatment after application.
Essential for safely stopping the micro acid etching process on treated tile and stone surfaces.
Consider using Feel Safe Neutraliser with Feel Safe Anti-slip to ensure complete control of your non-slip etching process
Description
Anti-Slip Treatment Neutraliser
Deactivation Formula
Usage Guidelines
Dwell Time: 5-10 mins
Applications/Coats: 1 Application
Application Method: Sponge / Microfibre Cloth
Dilution: Undiluted
Documentation
Technical Application Guide |
Feel-Safe Neutraliser is a specialist deactivation solution designed to rapidly neutralise and stabilise surfaces following treatment with Feel-Safe Anti-Slip.
It works by adjusting the surface pH to effectively stop the micro acid etching process, preventing further reaction and potential surface damage.
This product is designed for use only in conjunction with Feel-Safe Anti-Slip treatment.
Suitable for use on:
Ceramic tiles
Porcelain tiles
Natural stone
Most hard tile and paving surfaces treated with anti-slip
Not suitable for vinyl, linoleum, wood, metal or coated surfaces.
Special Features
Rapid pH balancing formulation to reduce the micro acid etching process of Feel-Safe Anti-slip treatment
Suitable for use on most tile and paving surfaces treated with Feel-Safe
Adjusts the low pH to effectively neutralise Feel-Safe Anti-slip, preventing further excess etching and possible surface damage
DIRECTIONS FOR USE:
Learn how to neutralise the non-slip micro acid etching process with these short instructions.
Always follow strict PPE guidelines when using this product, wear protective gloves/protective clothing/eye protection/face protection.
After applying and leaving Feel-Safe Anti-Slip treatment for the tested required dwell time (as per label instructions) generously apply the Feel Safe Neutraliser at a ratio of 2 times more of the amount of anti-slip treatment applied. Doing so will guarantee that the Feel Safe Neutraliser will effectively adjust the pH level preventing further etching of the ant-slip treatment. When using both formulations, we recommend working in small sections. This can be done with a sponge or microfibre cloth.
Allow the Feel Safe Neutraliser to dwell on the applied surface for a minimum of 5-10 minutes before thoroughly rinsing with clean water prior to moving on to the next area to be treated. DO NOT LET THE SOLUTION DRY ON THE SURFACE.
Pay attention to the time needed for Feel Safe Anti-slip treatment to work (always complete a test patch to understand the required action/dwell time), make sure you do not exceed these dwell times before applying the Feel Safe Neutraliser, as the acidic solution will continue to micro etch until treated with the Neutraliser.
Please Note:
Always protect areas not to be treated, Feel Safe neutraliser and anti-slip treatment formulas can cause damage if accidentally spilt or applied onto sensitive surfaces, i.e. metals, painted surfaces, woods, glazed surfaces etc. Rinse with plenty of clean water if accidentally spilt. Poor or inconsistent application may result in permanent surface damage to the applied tiles. It is imperative that a small test is completed, preferably on loose tiles or a small section of floor, to determine the product’s suitability and the correct application process to achieve desired anti-slip results.
Strong alkaline solution neutralises & balances acidic anti-slip formula
Natural Stone Cleaning Ltd will not accept any responsibility for misuse of this product.
COVERAGE:
5-8m2 per litre.
Exceeding these coverage guidelines may result in the product being ineffective. Do not dilute, use the product neat.
KEEP OUT OF THE REACH OF CHILDREN AND PETS
H314: Causes severe skin burns and eye damage.
P102: Keep out of reach of children.
P264: Wash hands thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321: Specific treatment (see instructions on this label).
P405: Store locked up.
Product SDS sheet available upon request.
Additional information
Weight: 6 kg
Dimensions: 20 × 18 × 30 cm
Size: 1 Litre, 5 Litre, Feel-Safe Bundle (1 litre), Feel-Safe Bundle (5 litre)